Is this module to save and recall offsets by the means of touch pads?
In any case, could you show other options in the eurorack modular realm for the same application, possibly in smaller HP room?
dual unipolar control voltage generator
Cells is a dual unipolar control voltage generator. Each of the 16 touch sensitive pads can be “fed” two 12bit values (semi-tone quantized or free scale), ranging from 0V to 5V
Although intended to be used as a duo-phonic instrument/sequencer, Cells can also be used to modulate filters, amps, anything with a cv input!
-Tap a pad to select it
-Hold a tune button to engage the “feeding process” (left button for channel 1, right for channel 2).
-Adjust a knob to the desired pitch (left knob for channel 1, right for channel 2).
So long as a tune button is held, the output is automatically changed as you move the knob
-Release the button, pitch information is stored to Eeprom
You can toggle between free scaling and semi-tone increment modes by pressing both tune buttons simultaneously.
Press a pad to trigger both gate and cv outputs
Hold 2 or more pads and Cells will arpeggiate, the rate can now be changed with the left knob. The right knob changes the octave range.
Sequence the cells using the 2 trigger inputs. The left input shifts up a row and the right input shifts right by one column
The gate outputs mirror the trigger inputs.
Cells requires +5V DC power to operate, as well as +/- 12V . On-board 12V to 5V conversion is provided if 5V isn’t available in your system. This is configured via a jumper on the rear of the module
This Module is currently available.$319 submitted Mar 27th 2016, 00:00 by ParanormalPatroler | last Change May 1st 2017, 10:57 by Circl3s