Vollrausch

Orpho Modular - Vacuum Tube VCO / Noise Generator

Google translation:
The Orpho "Fullrush" is a combination of Tube-VCO and Noise Generator. It is a non-standard VCO module designed primarily as a noise generator. Two Russian military tubes (6SH1P) are used. The noise can be mixed in with a scope controller. When the noise component increases, the frequency of the oscillator varies until it is completely full. If you reduce the noise completely, the pure VCO signal is left over. Due to the "curved" characteristics of the tube oscillator, the module does not have a precisely defined control characteristic (e.g., V / octave). The inevitable tolerances of the tube oscillator will also make each module sound a little different. The tubes can also be replaced by two EF95 or similar. be exchanged, which then sound different again. By applying a control voltage to the CV input, e.g. LFO, sequencer, etc. can be varied in the usual way the sound varied.

NOTE: The tube in this module stands out 33mm from the front panel!

http://www.orpho.de/vollrausch/

  • 160 mA +12V
  • ? mA -12V
  • ? mA 5V
  • 30 mm deep

This Module is currently available.

$206 Price in € submitted Dec 7th 2019, 00:19 by unitard | last Change Dec 10th 2019, 02:02 by Lugia

1 Users are observing this