Module is available as a DIY project only.
No info about availability.
Dual Voltage Controlled Vactrol Attenuator
This is a Voltage controlled Vactrol-based Attenuator that I build.
Sounds a bit like a LowPassGate
The Vactrol is selfmade by a LDR and a LED combined in a heat shrink tube.
Signal Input and Output are buffered by a TL074 without amplification.
Now I changed the wiring from two Outputs to two CV-In.
From top to bottom the jacks are:
CV-In 1
CV-In 2
Signal-In
Signal-Out
