ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Massive release from Plum Audio!
Apex X, OCP X, VASAT, ARBA and SLEW are now available.
Check out OCP X: This is the best Ornament and Crime version out there, now even more powerful with a new 10HP design that puts comfort at the center with additional interface elements that allow you to control the module easily and provide a new level of playability.
Massive release from Plum Audio! Apex X, OCP X, VASAT, ARBA and SLEW are now available.
Check out Apex X: Our new revision to our successful Apex with much more control.
We took Apex and ex12 expander and packed it in a one new 26HP 1U module with 4 CLICKKNOBS interface that we borrowed from RO'VED.
Apex X provide dual channel multi function tool with 23 different modes in a small package of 1U/26hp (Intellijel 1u format)
Available modes:
Announcing Sinc Pravus, a quad offset in 4 HP.
Each of Sinc Pravus’s four channels are controlled by a potentiometer with an LED for monitoring signal outputs. The input jacks are normalled so it can offset the same signal by different amounts or act as a mult.
The back-panel switch configures Sinc Pravus’s offset range to either ±5 or ±10 volts. With nothing patched to the inputs, the channels can be used as DC-voltage generators.
Announcing Xer Dualis, a 4-channel stereo mixer in 6 HP. Use the individual left and right inputs for your stereo signals, or just the left input for a mono signa. Each channel has a mute and an individual level control, and the output features a simple meter and a clip indicator. Grab Xer Dualis whether you need a submixer for a large system or an easy way to mix all the elements of a portable case together.
Barely a week left to save 10% on all modules during the month of October and get a chance to win an Oakley MultiMix or Lower West Side Studio M800 Triple Attenuator.
Click the link below for details;
http://lowerwestsidestudio.com
Built with tubes and transformers, experience more aggressive harmonics with the new Stoel Music Systems Vacuum Tube Ring Mod. Great for basses, FM-like sounds, percussion, and effects. Simply connect two audio sources to the X and Y inputs and manipulate the ring modulation effect by changing the input signals. Fully assembled and ready to ship. https://www.youtube.com/watch?v=Wj3QBgIWK1c
We just released two new modules: the Quad LFO and an associated LFO Phase Expander. The Quad LFO gives you four analog sine wave LFOs in 8 HP, with a jumper on back to switch to square waves. Each LFO ranges from ~0-23Hz, with linear voltage control. The 6 HP expander gives you three more outputs with a knob to control the phase relationship to the LFO they're connected to. You can connect up to four expanders, for *sixteen* modulation sources.
Say hello to µMIO!
It will allow you to use the Intellijel MIDI 1U system in any rack, and give access to all of the signals usually only available in the 7U Performance cases.
We went for a USB-C connector, which should make it easier to interface with phones/tablets.
The MIDI input accepts both TRS-A and TRS-B with no user intervention, and the output and thru ports can independently be configured as TRS-A or TRS-B via switches on the back.
A dual, multiwave, clocked or tapped LFO around two TAPLFO-ICs from electric-druid.
Output -5 / +5V
LFO range 0.025Hz – 50Hz
CV ins for Sync, Speed & Waveform. Accepting -5 / +5V while the dedicated pots act as offset.
Available @ noisyfruitslab.com
Time to get the low-down on Filter 8's low mode with BRiES! Pinged LFOs, slew limiting, low-frequency hold, and more—it's all there in his latest F8 video: https://youtu.be/fCHDgwSpvdc
Updated the popular MATRIX mixer.
It's now possible to add expanders to the unit; so for instance more fx-sends in your system :)
#youneverhaveenoughdelays
Enjoy your weeknd peeps!
The Maxima is back in stock! Thank you to the people who have already tried and tested the Maxima, your joy from using it and creative patching is an inspiration, I am always blown away by the patches people come up with in things I design - things I never even thought of. Now, go make some music!
The 2022 Spooky Sale is happening now at Lower West Side Studio.
Save 10% on all modules during the month of October and get a chance to win an Oakley MultiMix or Lower West Side Studio M800 Triple Attenuator.
Follow this link for details; https://richsstudioproject.wpcomstaging.com/2022/10/01/ssd-2022/
Release day!!!
I am pleased to announce the release of my first 1U module.
CLKDV (Clock Div) is a ultra simple clock divider utility.
It allows to divide the incoming clock by /2 /4 /8 /16.
There is no reset, no tralala.
It can also be used in audio frequency to generate sub-octave square waves.
Output clocks are at 0-5V
You can also put a clock in the input, the module flashes and… it’s nice 😀
Hi modular guys,
What’s new for Bvr-Instruments :
- New Bass drum in test...wait and see.
- Summer promotion is now included for TS1.
https://bvr-instruments.net/welcome
- Drum Polymeters in development for next TS1 firmware.
Cheers...
We recently started assembling a new batch of TP8, and just like the other modules, these have been updated with our brass nuts!
We started shipping these to some retailers, and have some back in stock in our webshop.
It also now is available as a complete DIY kit!
Even though it uses a SMT connector, assembly should be pretty easy.
Step 8