Hey Robert. :)

Damn. How many SSM2044's do you need? 2? I DO have 1 spare in an SSM2044 DIY board that was sent to me as a gift back in the later 90's. I never HAVE attached it to a panel.
Back in the later 90's I had purchased 25, as I was building modulars for other customers up til '98. I lost a LOT of parts from a former girlfriend who through a lot of my stuff out when we split up in 2006. I DO have the 1 spare though that I could fire off.
But you need 2 don't you?


Thank you for the link to the dual, Mopoco! I'll drop it in for the moment until I take a photo of my own module and upload it to my modular on here. The Neutron Sound one will be a little closer to what my implementation actually is.

(I should actually photo a few of the DIY panels, to more accurately represent my modular as well.)

Ryk


For reference / correction:

The SSM2044 VCF / ENV listed in the top row of the New Europeans is not fully correct. I have a DIY dual SSM2044 that I made in 2005, in that position. The SSM2044 / ENV module was the only SSM2044 module that I could find in the grid.

  • Ryk

July 2416 update to my modular:

  • HexInverter 909 Bass Drum and 909 Snare Drum have been removed (partly for panel space; partly for power consumption)
  • 3 x CGS / René Schmitz VCAs have been removed (un-removable 'thump' in at least 1 of them; output levels are too low from all 3. Replacing with VCAs from someone else / non-DIY)
  • the 2 x Serge USG's up above ARE DIY CGS / Serge USGs
  • the 2 x SSM2044 LPFs up above ARE, DIY
  • the 3 x basic VCO's above are Music From Outer Space VCOs (R.I.P. Ray. :( Thanks for everything! )
  • the Mutable Instruments Peaks and Branches modules will be here from my supplier tomorrow or Tuesday. I don't know exactly where in the cabinet, they'll be placed yet
  • the triple bi-directional router is a CGS / Serge DIY one and is non-functioning. There is a 2nd one that IS working, in another cabinet, below the one above.)
  • there is an 8 step CGS / Serge Programmer / Sequencer with the Moog 960 Sequencer Play / Stop / Skip switch for each step, for EACH direction, in the cabinet below
  • there is a Music From Outer Space Echo Rockit in the cabinet below

I still haven't moved any other 4U / Serge panel modules into the New Europeans modular, from The Deathlehem Machine modular. I don't know if I will be, as I may be moving AWAY from DIY modules, completely.


December 0115 update:

Row #1 - left most: the Doepfer A-149-1, A-149-2, A-137-1 and Expert Sleepers Disting Mk2 are on their way to me, as I type.

Row #1 - the left most VCO is a Music From Outer Space 1V/oct. VCO converted to Euro format
Row #1 - the dual SSM2044 is only a panel that I found here. It's my Deathlehem / Barry Klein dual SSM2044 LPF
Row #1 - the 3 Pure VCAs are used to represent my 3 x CGS / René Schmidt triple input VCAs
Row #1 - the ES-12 bipdirectional switch is a Serge / CGS triple bi-directional switch

Row #2 - the 2 left most VCOs are Music From Outer Space 1V/oct. VCOs converted to Euro format

Row #3 - the pair of Universal Slope Generators are 2 x Serge / CGS USGs that I converted to Euro format

Also missing from this picture are:

  • Serge / CGS - 8 Step Programmer / Sequencer with Moog 960 Sequencer Play / Skip / Stop switches, for each step, for EACH direction (forward / reverse)
  • A second Serge / CGS triple bi-directional switch
  • A Music From Outer Space Echo Rockit

The 3 of them are mounted in a standard Serge 17"x7" cabinet, on top of the euro cabinet.


September 2115 update:

In real form, all 3 rows in the above cabinet are mounted from the Right to the Left, with the signal path following the same routing

Top row:
- the triple Serge / CGS bi-polar switch that is in the same DIY panel as the Turing Machine, is represented by another manufacturer, here
- I expect the TipTop Trigger Riot to arrive from Moog Audio, late this week

Middle row:
- the two Serge / CGS Universal Slope Generators are DIY and represented here by a different manufacturer
- the dual SSM2044 4 pole LPF is DIY and represented here by a different manufacturer
- the Synthrotek Echo is expected to arrive later this week

Bottom row:
- the hexInverter 909 Bass Drum and 909 Snare Drum are both DIY, represented here by different hex panels
- the Music From Outer Space VCO is DIY and represented here by a slightly different model from the CGS manufacturer

Other modules that are being transferred into this New Europeans euro rack from my 4U cabinets, include:

  • dual, triple Comparator from Serge
  • dual Voltage Processor from Serge
  • 2 more MFOS VCOs
  • 2 x CGS VCOs
  • 1 x Serge / CGS 8 step Programmer Sequencer with the Moog 960 Sequencer switches modification
  • 1 more triple Serge / CGS bi-polar switch
  • 1 x Serge / CGS 1973 VCF
  • 1 x MFOS 2 pole State Variable Filter

and quite a bit more but I've run out of time, for today.


April 2815:
- I have the PCBs at least, but the modules still have to be built:
- - from hexInverter:
4 x Ate Oh Ate Toms
1 x Nein Oh Nein Snare
a 2nd Nein Oh Nein Bass Drum
2 x sympleSeq
1 x seqSquared
my 2nd Jupiter Storm (the 1st one is in my 4U modular, along with my V1.4 Liquid HiHat)

  • coming in the mail yet, are:
    • from Ladik:
      1 x Boolean
      1 x Q-010 Easy Quantizer
      1 x S-188 Clock Shuffler