DIY eurorack CLK / RST generator for Ableton LINK

After Ableton released the source code / SDK for, applications and devices that use it quickly started to appear.
The pink SPINK0 is a patchwork from shaduzlabs pink-0, a CLK / RESET generator based on the Rasperry Pi Zero W. His source code is the core of this project. After a lot of tweaking, tuning & changing, a working LINK connection could be established. I then squeezed the PiZero into its new dress, consisting of a set of three PCBs that all sandwich together to form a eurorack module.
Vive la mitraillette :)
Since the setup procedure of all the tools needed, to and for the build, is not a too trivial task. And on top of that you’d also need to make some changes/tweaks to the original source files to get everything running, since some pins and HW elements have changed. So I decided to distribute the adapted source directly embedded in the working OS-image for the raspberry, all set up.
I also added some bash scripts to easily switch between different network environments.
Disclaimer:
This thingy is a v0.1.0 patchwork. so please don’t expect stability over centuries. There may be a slip here or there. but it is definitively a handy and very usable toy to jam freely together with your friends!
But hey – code is opensource. maybe someone comes along and implements the MIDI out.
A image with preemt_rt enabled kernel for the system is already available for download - big ups to lucky lukas for that!!
Best operated in closed networks, updates, backups & Co. of other devices disabled!!!
Special thanks to shaduzlabs for this awewsome code and inspiration!!

little demo:

http://seismic.industries/spink-0/

  • 70 mA +12V
  • 0 mA -12V
  • 0 mA 5V
  • 13 mm deep

Module is available as a DIY project only.

This Module is currently available.

$280 submitted Feb 14th, 13:18 by seismic_industries | last Change May 4th, 11:42 by seismic_industries
Specs are approved by the manufacturer

2 Users are observing this