TEMPI Parameters
- Mod Shift functionality is turned off (although not necessary as Shift takes the State Gate Input when both Shift and Run/Stop are enabled)
- Mod Run/Stop is set to Run/Stop mode (red) and Toggled (led 6 off), so that channels can be turned on and off externally by tapping Ears
MOD-Enabled Channels per State
1. 1, 2, 3, 4
2. 2, 4
3. 1, 3
4. 3, 4
5. 1, 2
6. 1, 4
7. 2, 3
8. 2, 3, 4
9. 3, 4, 1
10. 4, 1, 2
11. 1, 2, 3
12. 1
13. 2
14. 3
15. 4
16. none


Cable Colour Scheme

Planar 2
- ABCD Out = Long Red
- ABCD In = Stackcable Green
- Gate Out = Short White
- XY Outs = Stackcable Purple

Tempi
- CH. 1-4 Out = Stackcable Green
- State Gate In = Short White
- Mod In = Long Black
- Tempo In = Medium White

Buff Mult
- CH. 1 = Long Blue (both in and outs)
- CH. 2 = Medium Yellow In, Long Yellow Outs

DATA
- Inputs = Long Red
- Mult Outs = Long Black
- Tempo Outs = Medium Grey/White

Disting
- X In = Medium Grey/White
- Y In = Medium Red
- A Out = Medium Yellow
- B Out = Long Yellow

M32
- LFO Rate In = Stackcable Purple
- VCA Out = Medium Green
- VCO Mod In = Short Green
- MULT 2 and VCF Cutoff = Short Yellow
- MULT 2 = Stackcable Yellow
- MULT In = Long Yellow

Plaits/Rings
- Outs (ODD in Rings) = short Orange

Cinnamon
- Lowpass Out = Short Red

Peaks
- OUT1 = Short Blue

Quad VCA
- 4/MIX = Long Blue

Mix3
- Out = Short Black