OSI-OP, Ratio Switch and XFMR VCA - Analog Oscilloscope Screen - Complex Waveforms (Eurorack)
Youtube Link:
www.vaemi.net
Rack DI Box for Gökhan Türkmen Stage
The Rack DI Box designed by VAEMI is specially crafted for Gökhan Türkmen’s stage performances. It can accommodate all digital or analog equipment, synthesizers, and drum machines, ranging from line-level devices to high-voltage synthesizer levels. This allows you to input the unbalanced audio signals of your equipment into the microphone preamp in a balanced manner through an XLR connector. The Rack DI Box is designed in a 2U rack format and features 8 channels.
Key features include:
- Balanced XLR Output
- Neutrik XLR connectors
- Enables the transmission of audio signals over long distances
- Clean and transparent sound
- 0 degree phase shift
- Accurate isolation from electrical noise in the audio signal
- -12dB Pad available for each channel
- 180 degree phase switch for each channel
- GND Lift switch for each channel
-
https://en.vaemi.net/rackdibox
Future House (EDM) Patch 1 with OSI-OP & XFMR VCA : Vaemi (Eurorack)
www.vaemi.net
“XFMR Ring Modulator” on sale now!
Active Ring Modulator Design with Transformer | (Eurorack)
Please visit our web site for more information www.vaemi.net
Click the link to watch XFMR Ring Modulator Demo Videos
Tamura Input and Output Transformers
Active Ring Modulator Design
Illuminated Design to Track the Phase of Modulation
https://www.etsy.com/listing/1447879595
Vaemi's new module XFMR VCA, which is designed for Eurorack systems, introduces users to a transformer-based VCA design.
Turkey-based Vaemi (Volt Age Electronic Musical Instruments), which commercially produces synthesizers and electronic musical instruments, recently released its first module, the Osi-Op (through zero fm VCO), and quickly followed with other Eurorack modules such as Shift Register, R2R Ladder, Buffered Multiple, making a name for itself. Now, it has introduced and brought its users the new XFMR VCA module, which is handcrafted with high-quality, through-hole components and features an audio transformer in its output.
The XFMR VCA is a VCA with linear curves. It has two separate audio outputs, such as the classic Op-Amp and the Transformer Output feature that gives it its name. It is AC Coupled and designed specifically for audio signals, making it a VCA module that you would want to use at the end of your chain. You can use it to add saturation, harmonics, and EQ to your patches made with the Osi-Op and through zero fm techniques, or use it for a clean range if desired. This wide range of options will be loved and make you feel comfortable.
Additionally, the XFMR VCA has an expander that allows you to expand it up to 3 channels. With the expander, you can have two more exponential VCA channels, which you can use for frequency modulation of oscillators or in other places you need them.
In studios, preamplifiers are equipment that can properly raise the microphone or line signals level without distorting or adding noise to the sound. However, when recording analog synthesizers, we tend to lower the sound instead of raising it because they have very high outputs. At this point, we thought that one of the most important things that preamplifiers add to recordings, other than gain, is audio transformers.
The XFMR VCA also has an EQ stage. This will provide great flexibility when finalizing your last patch, especially in multi-channel patches, and will provide a more accurate and clean sound in live performances.
Vaemi aims to create systems that can comfortably be used in today's electronic music and popular synthesis techniques such as additive, FM, Formant, Subtractive synthesis, and will continue to shape and evolve with new module designs that will be released in the coming year.
Please visit our web site for more information www.vaemi.net
Click the link to watch XFMR VCA Demo Videos
Modulagrid Module Link:
https://www.modulargrid.net/e/vaemi-xfmr-vca
Shift Register essentially stores the data in binary form, and it shifting the data in accordance with a clock signal reference. In fact, thanks to this feature, it is used for storing, adding, subtracting, multiplying, and dividing data in a computer. Multiplication and dividing are actually the results of the shifting process.
Shift Register is a module that is designed for Eurorack systems, and it can run between 0V-+5V. It runs with a clock signal. This way, all the data entered through data input is synchronized with the starting and ending times of the clock signal. This module is a dual and 4bit Shift Register module. It can be accepted as a 4-step sequencer. The jack on the module that types data is input.Even if you enter a CV signal or gate signal, the signal you will get from the outputs is a 5V gate signal. The first output, on the other hand, gives out exactly the same pattern you entered in the data signal, only a better-synced version with the clock,while synchronizing with the clock signal, it shifting the written pattern to another output as the clock arrives. In fact, as a result, when you enter 16-note clock signals, you get a 16-note delayed version of the pattern you typed from each output. If you use this module in the audio rate range, you can run it like an oscillator with clock signals that are hear able for human ears. In this way, while patching with square waves in Logic, you primarily get different phase degrees of the data (square wave) you entered.
You can visit our website for more information.
https://en.vaemi.net/product-page/shift-register-eurorack-diy-or-assembled
https://www.etsy.com/listing/1330789369/
https://reverb.com/item/62464281
https://www.modulargrid.net/e/vaemi-shift-register
@modular01 power specifications are exactly as written and written correctly. 5V is not used in the module you gave for example.
-- Vaemithis "5V is not used" should be inserted as 0 mA
its impossible to distinguish between zero mA and missing information when you keep this field empty
thank you!-- modular01
hello, thank you for your attention. Also, thanks for the warning. We fixed the issue
@modular01 power specifications are exactly as written and written correctly. 5V is not used in the module you gave for example.
You can now find Vaemi among manufacturers on Modulargrid. To do this, click the Modules tab in the Eurorack category. You can search from the Manufacturer section.
Below is the link for easy access.
https://www.modulargrid.net/e/modules/browser?SearchName=&SearchVendor=1044
You can now add our modules to your cases.
Buffered Multiple is an active signal multiplication circuit. Thanks to this module, for example, you can create many copies of an 8Vpp signal out of a single 8Vpp signal. You can use this module as two 1 In – 4 Outs or one 1 In – 8 Outs. Signal flow is shown on the module with arrows so that you can use the module without difficulty. As long as you do not plug in a jack through the input below, the input of the first channel on the top is directed from the inside, through the circuit board. The module is DC-coupled. Therefore, it can be used for all AC and DC signals, and all audio and CV signals.
https://en.vaemi.net/product-page/buffered-multiple-eurorack-diy-or-assembled
The first company to produce synthesizers and electronic musical instruments for commercial purposes in Turkey, VAEMI (Volt Age Electronic Musical Instruments) has introduced Osi-Op, which is the first Eurorack module with high-quality Thru Zero FM and a different Waveshape feature. This module is made by combining through-hole quality components and it is handmade. Osi-OP, which we regard as an analog reflection of the new era of digital electronic music, is an analog and voltage-controlled oscillator module. It was designed in Eurorack format and it has a width of 14hp. It has Thru Zero FM Input and a Waveshape Output, which can be used for morphing, and these are two of the most important features of this product. From a first impression, it may look like an oscillator that is appropriate for subtractive synthesis. However, it was actually designed to be used for additive synthesis. Thanks to Thru Zero FM, this oscillator can regard oscillators with Sine Wave as analog operators. You can even prepare your synthesizer patch without using the classic subtractive resonant filter. The most important aspect of Thru Zero FM is that there is no tune drift when you increase the modulation rate. For this reason, Thru Zero attenuator (TZ FM potentiometer) can almost be used like a filter itself. In addition to Square, Saw, Triangle, and Square Sub oscillator outputs, it has a Sine Wave Output, which was designed with JFET transistors and has a very low distortion rate, and a Waveshape Output, which was designed with Sine-Triangle and can be used for morphing. It also has a Wave Shape Input. It is connected to this input via the Triangle Wave circuit board inside. Sine Wave is fixed on Wave Shape but you can forward it to the other WS Input by patching other waveforms, and you can morph between two waveforms. The pulse width of the Square Wave can be adjusted. The same knob is the morphing knob of the Waveshape Output. Since the oscillator has tempco, there is a 1V/OCT calibrated CV Input that is sensitive to heat. It can perfectly stay in tune up to 3.5 octaves. In addition, for FM, there are two separate CV Inputs, Exponential and Thru Zero. While Exponential FM CV Input can take all types of DC and AC voltages, Thru Zero FM CV Input can only be used for AC audio rate signals. Also, when you enter a waveform on Thru Zero FM CV Input, oscillators are soft-synced automatically. With 1V/OCT CV Input, you can adjust the frequency of the oscillator; and with Exponential FM CV Input, you can easily add an LFO or Envelope Generator. Square Wave Sub OSC Output, which is completely synced with fundamental frequency and can give an octave lower than the fundamental, will help you a lot to create strong modern synth-bass sounds. It is made with NOS integrated. When the oscillator is FM modulated, the Sub OSC never gets negatively affected by this modulation; and it can maintain giving the frequency clearly. You can also switch the oscillator to the LFO mode. You can create subtractive syntheses by using two or more of these oscillators or by mixing these waveforms. The main reason why this oscillator was designed, as its name shows, is to enable the creation of complex FM patches and sounds by using 2-3 or more of these oscillators, just like Operator FM. While Thru Zero FM increases the modulation, it can maintain giving the same frequency without losing the adjusted frequency; and you can add harmonics to the sound musically. The module has 5 knob controls, 4 CV Inputs, an input for Waveshaper, and 6 ±5V waveform outputs. Osi-OP, which is handmade and produced with the help of Through Hole technology, is a product consisting of electronic components that are carefully tested.
Technicial Specifications
Knob 1 - Tune
Knob 2 - Fine Tune
Knob 3 - Thru Zero FM
Knob 4 - Exponential FM
Knob 5 - Pulse Width Modulation / Waveshape Morphing
Tune Range 3.5hz - 7khz
1V/OCT CV Input (±8V)
Exponential CV Input (±8V)
Thru Zero FM Input (±8V) (AC Coupled)
PWM / WS Morphing CV Input (±5V)
WS Morphing Wave Input
Sine Wave Output (±5V / 10Vpp) (1k ohm)
Triangle Wave Output (±5V / 10Vpp) (1k ohm)
Sawtooth Wave Output (±5V / 10Vpp) (1k ohm)
Square Wave Output (±5V / 10Vpp) (1k ohm)
Square Sub OSC Output (10Vpp) (1k ohm)
Waveshape Output (±5V / 10Vpp) (1k ohm)
LFO / OSC Switch
+12v 45mA
-12v 35mA
Deep 40mm (from panel to ribbon cable (including ribbon cable size)
Osi-Op User Manual TR:
https://drive.google.com/file/d/1sQWHTvsaAUMUlHlrkAN1fp1FAEvsBq_8/view
Osi-Op User Manual EN:
https://drive.google.com/file/d/1XGXBBHDMqIOYs2YpvCrNJXAZk3ZTGSwT/view
ABOUT VAEMI
Founded in İstanbul in 2020 by the brothers Efe Çakır and Tunç Çakır, Vaemi is a company that produces electronic musical instruments and synthesizers. Vaemi aims to produce studio-quality analog devices, vacuum tube instruments and effects, logic synthesizers, small lo-fi synthesizers, and utility circuits. They make their own designs, and they are working on developing a new system.
While doing that, they also endeavor to revive the instruments and much-adored circuits, which have stayed hidden in progress from the past to the present day. In this ever-growing electronic equipment industry, they prefer through hole (DIP) technology over surface-mount technology for reasons such as its sound quality and longevity. They have their sights trained on transmitting their high-quality handmaid instruments, produced with well-selected components, to Turkey and every other country in the world for a reasonable price.
You can also check out the electromagnetic microphone called "El-Ma Orsted", and passive utility circuits (pATT, pLDR, pLPG, pMultiple) which they published earlier, on www.vaemi.net
https://www.instagram.com/vaemisynth/
https://www.facebook.com/Vaemisynth/
https://twitter.com/Vaemisynth
ABOUT US
Vaemi, which is an institution that develops electronic musical instruments and synthesizers, came into life in Istanbul in 2020. Founded by the brothers Efe Çakır and Tunç Çakır, Vaemi aims to produce studio-quality analog devices, vacuum tube instruments and effects, logic synthesizers, small lo-fi synthesizers and utility circuits. We make our own designes, and we are working on developing a new system. While doing that, we also endeavour to revive the the instruments and circuits which are adored, and which have stayed hidden in progress from the past to the present day. In this ever-growing electronic equipment industry, we prefer through hole (DIP) technology over surface-mount technology for reasons such as its sound quality and longevity. We have our sights trained on transmitting our high quality and handmaid instruments, produced with well-selected components, to Turkey and every other country in the world for a reasonable price.
We will be releasing our Eurorack modules soon. The first eurorack module we will release will be the thruzero VCO. We hope you like it. We aim to be more active in 2022. There are 4 products that we have released before. You can visit our www.vaemi.net address to have information about these products.
Website:
https://en.vaemi.net/
https://www.instagram.com/vaemisynth/
https://www.facebook.com/Vaemisynth/
https://twitter.com/Vaemisynth
Our first instrument, El-Ma Orsted
