User Posts

Ok so this is my first VCF, the Happy Nerding HN VCF, this is just one sound source the Makenoise STO with all 3 outputs mixed before going through the WMD SSF ADSRVCA then onto the HNVCF. Multiple filter outputs tapped and routed to either Monsoon Clouds, Erica DSP or 2hp Verb. There is also a little 2hp Pluck at the start and finish going through clouds. Cheers for listening :)

If you've watched any of the Youtube vids, I'm pretty sure this is going to be his Instrument.

You are waaay too kind!!

Anything stereo all comes from 3 things which various signals go through, mono signals go into --> Erica Pico DSP, 2HP Verb and Monsoon Clouds ==> Stereo out. I don't have any way to pan anything at the moment.

Thanks

EDITED Apr 6th 2020, 07:55

"Trying out some Drone stuff, all 3 outputs on the Make Noise STO used into Mutable Veils which is also mixing in some 2hp Vowel and some fairly random samples played in via the Disting mk4, all that then goes into the Monsoon Clouds. Clouds is then Modulated via DPW Design AV-1 (Lovely bit of kit), then there is some subtle 2hp Pluck and Bell going on. Part of the modulation comes from the Noise Engineering Clep Diaz and part from the WMD / SSF ADSRVCA on looping mode kinda LFO-like. Pitch from the Pittsburgh Modular MicroSequence is messing with the samples in Disting."
Cheers

Enjoyed both, especially the Soundcloud one :)

I've had over-heating problems with my Rackbrute 6U, its getting sent back after a lengthy trouble shooting session with Arturia Support, it smelt like melting plastic, when i put the exact same module + more into my Tiptop Happy Ending Kit they all run cool. Real shame to be honest as it was about the prefect size / setup for the money and for my plans.
Bought it from Bax-shop in the UK, having real trouble getting them to send a return shipping label for it, they keep saying they have emailed it but nothing ever arrives.

Thanks Garfield, the deep tone is straight out of the sine wave output on the Make Noise STO with slow clocked Turing Machine taking gates from the Noise Engineering Bin Seq and straight to mixer on a mono channel. No midi keyboard or anything.

I should have Tamed the levels a bit before recording!!

No point making another thread to post this new Patch...

Yep I've got the 2hp Euclid at work too, it just needs a bit of gentle modulation to keep it evolving. I think the first thing I did when I racked up the Bin Seq was drive it from the Euclid, I guess something like the Befaco VC Slew would be nice for sliding between the pitches along with the Bin Seq.
I'm going to say that Mimetic Digitalis is a little out of my price range at the moment though i have been watching a few Ricky Tinez videos with it in.

Cheers :)

I've just had one of those moments where something feels to click into place with the direction you want to go in Eurorack, this is probably coupled with me reorganising my rack into a second TipTop Happy Ending kit, getting a Make Noise STO and the brilliant little Noise Engineering Bin Seq which is letting me have long gate lengths and slow note changes when clocking the Turing Machine (2hp TM) with the long tied notes from the Bin Seq.

Next steps are toward more modulation, probably an Ochd, so I can leave the Disting on Sample playing duty, though I do like the Clockable LFO on the Disting, the Noise Engineering Clep Diaz does do a nice job of clocked/stepped/LFO.

Its nice that I've managed to creep closer to my aims, thanks to reading the internet and watching Youtube :)

EDITED Mar 11th 2020, 15:54

Try https://www.modulargrid.net/e/befaco-instrument-interface-v2 or https://www.modulargrid.net/e/befaco-inamp

This is a subject that is just starting to confuse me too, so far I have bought quite a few of the great little 2hp modules and it does give quite a bit of constraint for fingers and patching. So I'm now thinking about Layout, all the small 2hp modules want to be scattered around so they are more accessible around lager hp modules.
I'm basically working across 3 rows, and I'm thinking i want to try and have the control bits like modulators, sequencers and Mixing on the bottom row then push the sound sources up and maybe the effects too.
I'm hoping things just become apparent where they should go as I buy more modules!!!
I'm half tempted to get another case and purpose it just for the output sections of mixer, effects etc etc

Good Luck!

Ah, no, I'm not coming our of the modular direct, into a Yamaha MG8 mixer first. I need to experiment more, the audio I manage to record into the iphone is too quiet if plugging direct, it only gets loud enough via the iRig 2 adapter but then its just Mono.

Thats waaay too kind, but thanks :) At the moment I'm finding getting Stereo audio into the iPhone in a loud enough state harder than it should be. I can get mono in via an iRig 2 adapter that is meant for a Guitar, but as far as i can tell it always comes out as Mono cos of the standard 1/4" Guitar jack socket. I never seem to get a loud-enough recording direct from my mixer without the iRig's pre-amp. I dare say I just need to learn more!

EDITED Feb 12th 2020, 08:00

This one didn't turn out too bad...

"Yeah its a still photo again with a piece of audio behind it! Its all the things in the photo that are making the sounds, Eurorack Synth is all the plinky plonky stuff, then the Roland boutique SH01 is on the sort of noise-wash and the TB03 is firing off (both the boutiques are manually tweaked). Kinda Ambient generative from the Eurorack, as much modulation as my gear will allow, Noise Engineering Clep Diaz playing a blinder in LFO mode, going through 2hp Tune, 2hp Pluck and Bell, Disting on Stereo Tape Delay is a bit nice, Erica PICO DSP and 2hp Verb are the other effects, using the Mutable instruments Veils as a slightly modulated mixer with some slight effects feedback loops. Things brought in and out with the Befaco STmix. Pretty happy with this for a few mins of noodling, time to pull all the plugs ;-) Let me know what you think."

Next purchase is going to be a Monsoon Clouds, then just maybe a Instruo/DivKid Ochd, though almost definitely another source of modulation.

As I think someone on here mentioned, the Stereo Tape Delay on the Disting is rather nice :)

Just in case this would save you a few HP https://zlobmodular.com/product/vnicursal-vca/ even if it does look a little like turning those knobs may summon the evil hoards!

10mins!!! I never thought i typed quite that slow!
It will be all the edits when i attempt to not sound rude! ;-)

When posting or responding to a forum thread the reCAPTCHA thing times out just about ever time I respond to or write a post.
How many seconds does it give you to type?

It may or may not be relevant to you but I can use my Pittsburgh MicroSequence to Trigger (when it hits a high note) and also control Pitch from the same CV Pitch output. With modules like the 2hp Pluck & Bell they have Polyphony in their release time so it can create some nice effects.

EDITED Feb 2nd 2020, 08:57

Cheers :)

One sound source, just the 2hp Pluck, a fair amount of modulation from the Noise Engineering Clep Diaz and Clocked LFO from the Disting Mk4, the LFO is also controlling the sequence playing on the Pittsburgh Modular Micro Sequence, though the Pitches are taken from the Clep Diaz steps via the 2hp Turing machine and quantisized through the 2hp Tune. Audio split 3 ways to Intellijel Mixup, Dry / wet via Erica DSP and wet via 2hp Verb. I can listen to this for a really long time without getting bored!

Just listened to it all while playing with cat toys with our cat :) The cat says she enjoyed it.... Good stuff.

Yeah, I could go via my own Yamaha Mixer.
And yeah the LH side would be having the FX Aid at the end of line but I guess it would be better before with a mult. The RH side is infinity more capable but a load of modules for a load of money.

The Patch out on the LH is self-contained.

Believe it or not there is method in my madness, My hope was that someone may show me their examples of their stages to output so I can learn a bit from others.
RH side would have the ability to split signals, route stereo, Pan mono, mute, effect and then double back on ts self for an feedback loop arund the effects.
LH side, relatively minimal patching ability but CV control, yet Mix and output with monitoring all in one module.

I could leave out the level meters so it doesn't look like a Christmas tree ;-)

https://cdn.modulargrid.net/img/racks/modulargrid_1105457.jpg

Left Hand Side or Right Hand Side??? The Left is probably a load cheaper!!

The ability to come out in stereo with some final effects and maybe have the ability to set up some effects loops (Feedback loops) to come back into the mix.

I've started out my modular journey with a fair amount of 2hp Modules, they really are very good but to sensibly use them when mounted in a rack you need to give them a minimum of 2-3hp blank space between them so you can tweak a knob that is right next to a patch lead jack... unless you have some type of Uber-Chopsticks-Skillz!

I'll still be buying more 2hp gear but I will focus on modules with a 3hp or larger size from now on so things are actually usable, I'm not sure how the recently announced Lunch Boxes from 2hp modular will be usable without a load of blank panels https://images.app.goo.gl/TytFVdND3qBGhqa28 But yeah, loads of love for the 2hp gear still.

btw.... that SD card slot in the Disting.... Have a paid of Tweezers on Standby!! ;-)

EDITED Jan 18th 2020, 09:34

Good :)

But its OK to do if...?

You simply enjoy it.
You like the experimentation.
You occasionally make something that sounds good.
You can cope that you can never get back to that ace patch you did a while back.
You sell other things in your life that you don't use to fund your modular.
You can cope with not buying everything at once.
....and you don't have to be good at something to enjoy it.

Cheers Guys...

A quad VCA is on my wish list (either Veils or Blinds), I must say I like a few of the dual VCA though from Frequency Central or Eectrosmith, skinny enough to dot around a system close to what they will mainly be used on.

So with Maths, can you shoot it 4 separate triggers and get 4 separate envelopes?

I can see two ways of thinking about this...
I currently have the WMD SSF ADSRVCA which I'm really liking, is this a good enough reason to buy more of them or is it better / more interesting with varied possibilities to buy things like the Befaco ADSR, Instruo Ceis, Intelegel Dual ADSR, Qu-bit Contour etc etc??? (Think exactly the same question for VCAs)

For the Befaco I'll probably do the DIY, Instruo looks pretty similar to the befaco then there is the Intellijel Dual ADSR which I really like the idea of as its based around the SH101, I used to own the Roland MC202.

I don't really have intentions to ever own a wall of Synth so maybe sticking with the WMD SSF ADSRVCA is the way to go, I'm also interested in something with a long cycle time.

I replied without RTFM! :)

btw, Defrag... your tracks are very film score-esque, some dark and foreboding stuff :)

Eventually when I've bought a few more modules I want to fire the 2hp bell off via a Befaco Burst as a one-shot of notes via a 2hp ARP, so hope for a flurry of notes that can be fired off with just one slowly clocked trigger.
I'm assuming A-2 on the Disting is like a Clock Multiplier?

The -Envelope from the ADSRVCA is modulating the speed of sample playback and there's 2hp action from Pluck and Bell along with some subtle Vowel, Erica Pico DSP and 2hp Verb on effects duty.

Sounding good :)

Nice tune too ;-)

Hi Garfield,

I've had a bit of a play with the sample modes, with my current rack setup there is some entertainment to be had with having a long sample set then triggering the ADSR to play snippets of the audio along with the other sequenced parts. I've got some old shortwave radio recordings, weather reports and the ubiquitous Moon-Landing samples, plenty of scope for fun. I need to dive into the sample playing abilities a bit deeper, the thing I note straight away is that the more samples you have loaded the harder it is to scroll through them with the limited range knob as its VERY fine adjustments.

I can get the SD card in with my fingers/finger nail but its never going to come out without tweezers :)

:)

I've just got my SD card.... you need to order a pair of Tweezers to go with it, and I don't particularly have fat fingers.

I'm enjoying the throw-away-ness of it all, pull all the patch leads and re-patch and find something completely different.... then mostly forget how to do the bits that were cool in the last patch straight way!!

Cheers, its a bit basic.
The good thing about not having much money to spend on Modular is that each new Module gets a damn good play with before the next one arrives.

Melodic sort of thing

With this rack
https://cdn.modulargrid.net/img/racks/modulargrid_976055.jpg

The 3 page manual link

3 page manual, this site seemes to strip the underscores

wow, thanks defragmenteur.

The first link looks like it may make things easier but the bottom link, copied and pasted into a browser doesn't work.

Hi Diego, Yes, thats us :) I think we scared our drinking-customers a bit but I enjoyed it ;-)

The Clockable effects and LFO are probably going to get used, I miss having all the direct control knobs for instant tweaking.

Hello Garfield.
I've been keeping dipping into it and the manual, I never knew I could fall out with a piece if gear so fast!

I think the VCO bits are the most usable for me at the moment, then there is the bit about using single-cycle .wav files for the Pulsar VCO and Wavetable VCO (SD card needed).

I guess you could say that, as a beginner at modular, the Manual could have an easy to understand explanation of each menu function, with 109 pages in the manual already a little more less-techie info wouldn't be missed.

EDITED Dec 21st 2019, 09:43

I've just got the Disting Mk4 and now i know why i was trying to avoid menu-based modules. I'm hoping there is going to be something in there that i can experiment with but right now I feel like the manual is like some weird form of algebra, and i could have spent my money on something i would have enjoyed straight out of the box rather than Click-Twist-click-twist-check the manual, plug-unplug-check the manual!

I shall persevere, but leave this expletive here Fckngmenus

Some time later
I have an SD card turning up soon for this so I can play with the sample playback stuff.
My current feelings are that I would get better use (Fun) out of a Ping-able LFO and a Radio Music :)

EDITED Dec 19th 2019, 21:57

Cheers for the suggestions, Temps Utile was suggested in another thread and it looks like a whole lot of fun :)

Got it! Thanks
4ms things are also on the Wish-list.

I've just been told over on FB that, as i kind of suspected, the Befaco Burst will do a 1-shot burst from a single pulse/ping/thing!